MTN/8006 and MTN8006g | |
|
The MTN/8006 vibration module is designed to power and accept a signal from a constant current accelerometer. The signal can be integrated and converted to a 4-20mA current proportional to velocity (8006) or a standard acceleration (8006g) output. The unit is housed in a DIN Rail mounting box for easy installation into junction boxes etc. |
|
MTN/8065 | |
|
The MTN/8065 vibration module is designed to power and accept an AC signal from a constant current accelerometer. The module integrates this signal and provides 0-10V output proportional to RMS velocity and enveloped g output plus a buffered, unfiltered (Raw AC) output for connection to a data collector. The module can operate with any 2-wire constant current accelerometer ie. MTN/1100, MTN/1120, MTN/1130, MTN/1830, MTN/1135 etc. Envleope g values are considered by many to be a sensitive and convenient marker for bearing wear. |
|
MTN/8066 | |
|
The MTN/8066 g-mac powers any constant current accelerometer and provides two outputs, velocity and peak g. The first is a measure of overall system vibration while the second provides large signals for small changes in high frequency vibrations and thus is sensitive to bearing faults. An AC output via a BNC connector is available for complete vibration analysis with an FFT analyser while the user can select 4-20mA or 0-10V outputs for monitoring the DC vibration signals in a PLC, DCS or other industrial controller. |
|
